在攪拌車的行駛過程中減震器一般都會有響聲，這是因為減震器與鋼板彈簧、車架或軸相互碰撞，膠墊損壞或是減震器防塵筒變形，油液缺乏等原因引起的，下面小編來講講攪拌車減震器漏油現象出現。

During the driving process of the mixer, the shock absorber will generally make noise, which is caused by the collision between the shock absorber and the leaf spring, the frame or the shaft, the damage of the rubber pad, the deformation of the shock absorber dust-proof cylinder, and the lack of oil. The following small series will talk about the oil leakage of the shock absorber of the mixer.

攪拌車減震器漏油一般是以下幾個原因：

Oil leakage of mixer shock absorber is generally caused by the following reasons:

1. 減震器內部的清潔度不夠好，有焊渣、鐵屑等雜物導致油封磨損。

1. The cleanliness inside the shock absorber is not good enough, and there are sundries such as welding slag and iron filings, which cause the oil seal to wear.

2. 減震器的工作條件比較惡劣，外部的泥沙等雜物進入油封，導致其磨損漏油。

2. The working conditions of the shock absorber are relatively poor, and foreign matters such as external sediment enter the oil seal, resulting in wear and oil leakage.

3. 減震器油封的唇口老化，失去了密封的功能。

3. The lip of the oil seal of the shock absorber is aged and loses its sealing function.

4. 可能是在噴底盤裝甲的時候，減震器沒有遮擋好，裝甲附在減震器活塞桿上導致油封磨損而漏油。

4. It may be that the shock absorber was not well shielded when spraying chassis armor, and the armor was attached to the piston rod of the shock absorber, resulting in oil seal wear and oil leakage.

5. 控制活塞運動的支桿需要在金屬管的一端延長出來，所以這個部位須得密封嚴密，一般的漏油都和密封不嚴有直接關系的。

5. The support rod for controlling the piston movement needs to be extended at one end of the metal pipe, so this part must be sealed tightly. Generally, oil leakage is directly related to poor sealing.

6. 一般混凝土攪拌車的液壓的減震器漏油就說明它的使用年限已到。

6. The hydraulic shock absorber of a general mixer leaks oil, which means that its service life has expired.

攪拌車底盤的減震器是非常重要的，很多人在做保養的時候都容易忽略它，希望看了這篇文章，大家能夠對減震器引起重視。

The shock absorber of the mixer chassis is very important. Many people tend to ignore it when doing maintenance. I hope that after reading this article, everyone can pay attention to the shock absorber.